1, Weighing: first of all, we choose the raw material box according to the gram weight of the product, not too big to hold the raw material; General raw materials than products 2-4 grams, so put some raw materials will not lack.
2, Baking: will weigh good raw materials with high wave baking. Don't press the high profile wave too tightly, leaving 2-4mm
The gap is conducive to the evaporation of gas and water; The ingredients should not be overbaked. It is better to lump and stick to the box.
3. Plain noodle: Put the baked raw materials on the mold, start the button of plain noodle, and finish the leg mold through the initial pressure, exhaust gas, secondary pressure and molding (the specific data can be adjusted according to different products).
4. Decal: Place the decal paper (process description of decal paper) to be printed on the plain color product, and start the decal button (procedure as above).
5. Polishing powder supplement: Sprinkle the polishing powder evenly on the product and start the button (the procedure is the same as the above data, the data will be adjusted separately). Add light powder to complete the product removal.
6. The product is sent to the grinding workshop, coarse grinding with gauze bag, then fine grinding with impeller, polishing with hemp wheel and cloth wheel.
7. Quality inspection and packaging to get finished products.
